Prepare code for adding voltage

Add clippy and fmt checks

Prepare code for adding voltage

.github/workflows/rust.yml

@@ -21,6 +21,10 @@ jobs:
     - uses: actions/checkout@v2
     - name: Add target
       run: rustup target install x86_64-unknown-linux-musl
+    - name: Run clippy
+      run: cargo clippy -- -D warnings
+    - name: Run fmt check
+      run: cargo fmt -- --check
     - name: Run tests
       run: cargo test --verbose
     - name: Install binary compressor

src/config.rs

@@ -26,7 +26,7 @@ impl FromStr for Card {
         value[4..]
             .parse::<u32>()
             .map_err(|e| AmdFanError::InvalidSuffix(format!("{:?}", e)))
-            .map(|n| Card(n))
+            .map(Card)
     }
 }
 
@@ -71,7 +71,7 @@ impl<'de> Deserialize<'de> for Card {
                 }
             }
         }
-        deserializer.deserialize_str(CardVisitor).map(|v| Card(v))
+        deserializer.deserialize_str(CardVisitor).map(Card)
     }
 }
 
@@ -115,7 +115,7 @@ pub enum LogLevel {
 }
 
 impl LogLevel {
-    pub fn to_str(&self) -> &str {
+    pub fn as_str(&self) -> &str {
         match self {
             LogLevel::Off => "OFF",
             LogLevel::Error => "ERROR",
@@ -149,7 +149,7 @@ impl Config {
             return self.max_speed();
         }
 
-        crate::linear_map(
+        crate::utils::linear_map(
             temp,
             self.speed_matrix[idx].temp,
             self.speed_matrix[idx + 1].temp,

src/fan/change_mode.rs

@@ -0,0 +1,51 @@
+use gumdrop::Options;
+
+use crate::config::Config;
+use crate::io_err::not_found;
+use crate::FanMode;
+
+/// Change card fan mode to either automatic or manual
+pub fn run(switcher: Switcher, mode: FanMode, config: Config) -> std::io::Result<()> {
+    let mut controllers = crate::utils::controllers(&config, true)?;
+
+    let cards = match switcher.card {
+        Some(card_id) => match controllers
+            .iter()
+            .position(|hw_mon| *hw_mon.card == card_id)
+        {
+            Some(card) => vec![controllers.remove(card)],
+            None => {
+                eprintln!("Card does not exists. Available cards: ");
+                for hw_mon in controllers {
+                    eprintln!(" * {}", *hw_mon.card);
+                }
+                return Err(not_found());
+            }
+        },
+        None => controllers,
+    };
+
+    for hw_mon in cards {
+        match mode {
+            FanMode::Automatic => {
+                if let Err(e) = hw_mon.set_automatic() {
+                    log::error!("{:?}", e);
+                }
+            }
+            FanMode::Manual => {
+                if let Err(e) = hw_mon.set_manual() {
+                    log::error!("{:?}", e);
+                }
+            }
+        }
+    }
+    Ok(())
+}
+
+#[derive(Debug, Options)]
+pub struct Switcher {
+    #[options(help = "Print help message")]
+    help: bool,
+    #[options(help = "GPU Card number")]
+    card: Option<u32>,
+}

src/fan/mod.rs

@@ -0,0 +1,25 @@
+use gumdrop::Options;
+
+pub mod change_mode;
+pub mod monitor;
+pub mod service;
+
+#[derive(Debug, Options)]
+pub struct AvailableCards {
+    #[options(help = "Help message")]
+    help: bool,
+}
+
+#[derive(Debug, Options)]
+pub enum FanCommand {
+    #[options(help = "Print current temp and fan speed")]
+    Monitor(monitor::Monitor),
+    #[options(help = "Set fan speed depends on GPU temperature")]
+    Service(service::Service),
+    #[options(help = "Switch to GPU automatic fan speed control")]
+    SetAutomatic(change_mode::Switcher),
+    #[options(help = "Switch to GPU manual fan speed control")]
+    SetManual(change_mode::Switcher),
+    #[options(help = "Print available cards")]
+    Available(AvailableCards),
+}

src/fan/monitor.rs

@@ -1,7 +1,9 @@
-use crate::config::Config;
-use crate::{controllers, AmdFanError};
 use std::str::FromStr;
 
+use crate::config::Config;
+use crate::utils::controllers;
+use crate::AmdFanError;
+
 #[derive(Debug)]
 pub enum MonitorFormat {
     Short,
@@ -34,6 +36,7 @@ pub struct Monitor {
     format: MonitorFormat,
 }
 
+/// Start print cards temperature and fan speed
 pub fn run(monitor: Monitor, config: Config) -> std::io::Result<()> {
     match monitor.format {
         MonitorFormat::Short => short(config),
@@ -57,7 +60,14 @@ pub fn verbose(config: Config) -> std::io::Result<()> {
                 hw_mon
                     .pwm()
                     .map_or_else(|_e| String::from("FAILED"), |f| f.to_string()),
-                (crate::linear_map(hw_mon.pwm().unwrap_or_default() as f64, min as f64, max as f64, 0f64, 100f64)).round(),
+                (crate::utils::linear_map(
+                    hw_mon.pwm().unwrap_or_default() as f64,
+                    min as f64,
+                    max as f64,
+                    0f64,
+                    100f64
+                ))
+                .round(),
             );
 
             println!();
@@ -93,7 +103,14 @@ pub fn short(config: Config) -> std::io::Result<()> {
                 min,
                 max,
                 hw_mon.pwm().unwrap_or_default(),
-                crate::linear_map(hw_mon.pwm().unwrap_or_default() as f64, min as f64, max as f64, 0f64, 100f64).round(),
+                crate::utils::linear_map(
+                    hw_mon.pwm().unwrap_or_default() as f64,
+                    min as f64,
+                    max as f64,
+                    0f64,
+                    100f64
+                )
+                .round(),
             );
         }
         std::thread::sleep(std::time::Duration::from_secs(4));

src/fan/service.rs

@@ -0,0 +1,39 @@
+use gumdrop::Options;
+
+use crate::config::Config;
+use crate::io_err::not_found;
+
+/// Start service which will change fan speed according to config and GPU temperature
+pub fn run(config: Config) -> std::io::Result<()> {
+    let mut controllers = crate::utils::controllers(&config, true)?;
+    if controllers.is_empty() {
+        return Err(not_found());
+    }
+    let mut cache = std::collections::HashMap::new();
+    loop {
+        for hw_mon in controllers.iter_mut() {
+            let gpu_temp = hw_mon.max_gpu_temp().unwrap_or_default();
+            log::debug!("Current {} temperature: {}", hw_mon.card, gpu_temp);
+            let last = *cache.entry(*hw_mon.card).or_insert(1_000f64);
+
+            if (last - gpu_temp).abs() < 0.001f64 {
+                log::debug!("Temperature didn't change");
+                continue;
+            };
+            let speed = config.speed_for_temp(gpu_temp);
+            log::debug!("Resolved speed {:.2}", speed);
+
+            if let Err(e) = hw_mon.set_speed(speed) {
+                log::error!("Failed to change speed to {}. {:?}", speed, e);
+            }
+            cache.insert(*hw_mon.card, gpu_temp);
+        }
+        std::thread::sleep(std::time::Duration::from_secs(4));
+    }
+}
+
+#[derive(Debug, Options)]
+pub struct Service {
+    #[options(help = "Help message")]
+    help: bool,
+}

src/hw_mon.rs

@@ -1,6 +1,7 @@
 use crate::config::Card;
 use crate::io_err::{invalid_input, not_found};
-use crate::{linear_map, AmdFanError, HwMon, HW_MON_DIR, ROOT_DIR};
+use crate::utils::linear_map;
+use crate::{AmdFanError, HwMon, HW_MON_DIR, ROOT_DIR};
 
 /// pulse width modulation fan control minimum level (0)
 const PULSE_WIDTH_MODULATION_MIN: &str = "pwm1_min";
@@ -21,11 +22,11 @@ const PULSE_WIDTH_MODULATION_MANUAL: &str = "1";
 impl HwMon {
     pub fn new(card: &Card, name: &str) -> Self {
         Self {
-            card: card.clone(),
+            card: *card,
             name: String::from(name),
             pwm_min: None,
             pwm_max: None,
-            temp_inputs: load_temp_inputs(&card, name),
+            temp_inputs: load_temp_inputs(card, name),
         }
     }
 
@@ -34,7 +35,7 @@ impl HwMon {
         for name in self.temp_inputs.iter() {
             results.push(self.read_gpu_temp(name).unwrap_or(0));
         }
-        results.sort();
+        results.sort_unstable();
         results
             .last()
             .copied()
@@ -186,7 +187,7 @@ fn hw_mon_dirs_path(card: &Card) -> std::path::PathBuf {
 
 #[inline]
 fn hw_mon_dir_path(card: &Card, name: &str) -> std::path::PathBuf {
-    hw_mon_dirs_path(&card).join(name)
+    hw_mon_dirs_path(card).join(name)
 }
 
 pub(crate) fn open_hw_mon(card: Card) -> std::io::Result<HwMon> {

src/io_err.rs

@@ -1,14 +1,12 @@
 use std::io::Error as IoErr;
 use std::io::ErrorKind;
 
-pub fn invalid_data() -> IoErr {
-    IoErr::from(ErrorKind::InvalidData)
-}
-
+#[inline(always)]
 pub fn not_found() -> IoErr {
     IoErr::from(ErrorKind::NotFound)
 }
 
+#[inline(always)]
 pub fn invalid_input() -> IoErr {
     IoErr::from(ErrorKind::NotFound)
 }

src/main.rs

@@ -1,16 +1,18 @@
-mod config;
-mod hw_mon;
-mod io_err;
-mod monitor;
-
-extern crate log;
-
+use std::fmt::Formatter;
 use std::io::ErrorKind;
 
-use crate::config::{load_config, Card, Config};
-use crate::io_err::{invalid_data, not_found};
 use gumdrop::Options;
-use std::fmt::Formatter;
+
+use crate::config::{load_config, Card};
+
+mod config;
+mod fan;
+mod hw_mon;
+mod io_err;
+mod utils;
+mod voltage;
+
+extern crate log;
 
 static CONFIG_DIR: &str = "/etc/amdfand";
 static CONFIG_PATH: &str = "/etc/amdfand/config.toml";
@@ -45,12 +47,6 @@ impl std::fmt::Display for AmdFanError {
     }
 }
 
-// linear mapping from the xrange to the yrange
-fn linear_map(x: f64, x1: f64, x2: f64, y1: f64, y2: f64) -> f64 {
-    let m = (y2 - y1) / (x2 - x1);
-    m * (x - x1) + y1
-}
-
 #[derive(Debug)]
 pub struct HwMon {
     card: Card,
@@ -65,38 +61,12 @@ pub enum FanMode {
     Automatic,
 }
 
-#[derive(Debug, Options)]
-pub struct Service {
-    #[options(help = "Help message")]
-    help: bool,
-}
-
-#[derive(Debug, Options)]
-pub struct Switcher {
-    #[options(help = "Print help message")]
-    help: bool,
-    #[options(help = "GPU Card number")]
-    card: Option<u32>,
-}
-
-#[derive(Debug, Options)]
-pub struct AvailableCards {
-    #[options(help = "Help message")]
-    help: bool,
-}
-
-#[derive(Debug, Options)]
+#[derive(Options)]
 pub enum Command {
-    #[options(help = "Print current temp and fan speed")]
-    Monitor(monitor::Monitor),
-    #[options(help = "Set fan speed depends on GPU temperature")]
-    Service(Service),
-    #[options(help = "Switch to GPU automatic fan speed control")]
-    SetAutomatic(Switcher),
-    #[options(help = "Switch to GPU manual fan speed control")]
-    SetManual(Switcher),
-    #[options(help = "Print available cards")]
-    Available(AvailableCards),
+    #[options(help = "GPU card fan control")]
+    Fan(fan::FanCommand),
+    #[options(help = "Overclock GPU card")]
+    Voltage(voltage::VoltageCommand),
 }
 
 #[derive(Options)]
@@ -109,105 +79,6 @@ pub struct Opts {
     command: Option<Command>,
 }
 
-fn read_cards() -> std::io::Result<Vec<Card>> {
-    let mut cards = vec![];
-    let entries = std::fs::read_dir(ROOT_DIR)?;
-    for entry in entries {
-        match entry
-            .and_then(|entry| {
-                entry
-                    .file_name()
-                    .as_os_str()
-                    .to_str()
-                    .map(String::from)
-                    .ok_or_else(invalid_data)
-            })
-            .and_then(|file_name| file_name.parse::<Card>().map_err(|_| invalid_data()))
-        {
-            Ok(card) => {
-                cards.push(card);
-            }
-            _ => continue,
-        };
-    }
-    Ok(cards)
-}
-
-fn controllers(config: &Config, filter: bool) -> std::io::Result<Vec<HwMon>> {
-    Ok(read_cards()?
-        .into_iter()
-        .filter(|card| !filter || config.cards().iter().find(|name| **name == *card).is_some())
-        .filter_map(|card| hw_mon::open_hw_mon(card).ok())
-        .filter(|hw_mon| !filter || { hw_mon.is_amd() })
-        .filter(|hw_mon| !filter || hw_mon.name_is_amd())
-        .collect())
-}
-
-fn service(config: Config) -> std::io::Result<()> {
-    let mut controllers = controllers(&config, true)?;
-    if controllers.is_empty() {
-        return Err(not_found());
-    }
-    let mut cache = std::collections::HashMap::new();
-    loop {
-        for hw_mon in controllers.iter_mut() {
-            let gpu_temp = hw_mon.max_gpu_temp().unwrap_or_default();
-            log::debug!("Current {} temperature: {}", hw_mon.card, gpu_temp);
-            let last = *cache.entry(*hw_mon.card).or_insert(1_000f64);
-
-            if (last - gpu_temp).abs() < 0.001f64 {
-                log::debug!("Temperature didn't change");
-                continue;
-            };
-            let speed = config.speed_for_temp(gpu_temp);
-            log::debug!("Resolved speed {:.2}", speed);
-
-            if let Err(e) = hw_mon.set_speed(speed) {
-                log::error!("Failed to change speed to {}. {:?}", speed, e);
-            }
-            cache.insert(*hw_mon.card, gpu_temp);
-        }
-        std::thread::sleep(std::time::Duration::from_secs(4));
-    }
-}
-
-fn change_mode(switcher: Switcher, mode: FanMode, config: Config) -> std::io::Result<()> {
-    let mut controllers = controllers(&config, true)?;
-
-    let cards = match switcher.card {
-        Some(card_id) => match controllers
-            .iter()
-            .position(|hw_mon| *hw_mon.card == card_id)
-        {
-            Some(card) => vec![controllers.remove(card)],
-            None => {
-                eprintln!("Card does not exists. Available cards: ");
-                for hw_mon in controllers {
-                    eprintln!(" * {}", *hw_mon.card);
-                }
-                return Err(not_found());
-            }
-        },
-        None => controllers,
-    };
-
-    for hw_mon in cards {
-        match mode {
-            FanMode::Automatic => {
-                if let Err(e) = hw_mon.set_automatic() {
-                    log::error!("{:?}", e);
-                }
-            }
-            FanMode::Manual => {
-                if let Err(e) = hw_mon.set_manual() {
-                    log::error!("{:?}", e);
-                }
-            }
-        }
-    }
-    Ok(())
-}
-
 fn main() -> std::io::Result<()> {
     if std::fs::read(CONFIG_DIR).map_err(|e| e.kind() == ErrorKind::NotFound) == Err(true) {
         std::fs::create_dir_all(CONFIG_DIR)?;
@@ -215,7 +86,7 @@ fn main() -> std::io::Result<()> {
 
     let config = load_config()?;
 
-    std::env::set_var("RUST_LOG", config.log_level().to_str());
+    std::env::set_var("RUST_LOG", config.log_level().as_str());
     pretty_env_logger::init();
 
     let opts: Opts = Opts::parse_args_default_or_exit();
@@ -226,14 +97,20 @@ fn main() -> std::io::Result<()> {
     }
 
     match opts.command {
-        None => service(config),
-        Some(Command::Monitor(monitor)) => monitor::run(monitor, config),
-        Some(Command::Service(_)) => service(config),
-        Some(Command::SetAutomatic(switcher)) => change_mode(switcher, FanMode::Automatic, config),
-        Some(Command::SetManual(switcher)) => change_mode(switcher, FanMode::Manual, config),
-        Some(Command::Available(_)) => {
+        None => fan::service::run(config),
+        Some(Command::Fan(fan::FanCommand::Monitor(monitor))) => fan::monitor::run(monitor, config),
+        Some(Command::Fan(fan::FanCommand::Service(_))) => fan::service::run(config),
+        Some(Command::Fan(fan::FanCommand::SetAutomatic(switcher))) => {
+            fan::change_mode::run(switcher, FanMode::Automatic, config)
+        }
+        Some(Command::Fan(fan::FanCommand::SetManual(switcher))) => {
+            fan::change_mode::run(switcher, FanMode::Manual, config)
+        }
+        Some(Command::Fan(fan::FanCommand::Available(_))) => {
             println!("Available cards");
-            controllers(&config, false)?.into_iter().for_each(|hw_mon| {
+            utils::controllers(&config, false)?
+                .into_iter()
+                .for_each(|hw_mon| {
                     println!(
                         " * {:6>} - {}",
                         hw_mon.card,
@@ -242,5 +119,8 @@ fn main() -> std::io::Result<()> {
                 });
             Ok(())
         }
+        Some(Command::Voltage(voltage::VoltageCommand::Placeholder(_))) => {
+            unimplemented!()
+        }
     }
 }

src/utils.rs

@@ -0,0 +1,30 @@
+use crate::config::{Card, Config};
+use crate::{hw_mon, HwMon, ROOT_DIR};
+
+/// linear mapping from the xrange to the yrange
+pub fn linear_map(x: f64, x1: f64, x2: f64, y1: f64, y2: f64) -> f64 {
+    let m = (y2 - y1) / (x2 - x1);
+    m * (x - x1) + y1
+}
+
+/// Read all available graphic cards from direct rendering manager
+pub fn read_cards() -> std::io::Result<Vec<Card>> {
+    Ok(std::fs::read_dir(ROOT_DIR)?
+        .into_iter()
+        .filter_map(|entry| entry.ok())
+        .filter_map(|entry| entry.file_name().as_os_str().to_str().map(String::from))
+        .filter_map(|file_name| file_name.parse::<Card>().ok())
+        .collect())
+}
+
+/// Wrap cards in HW Mon manipulator and
+/// filter cards so only amd and listed in config cards are accessible
+pub fn controllers(config: &Config, filter: bool) -> std::io::Result<Vec<HwMon>> {
+    Ok(read_cards()?
+        .into_iter()
+        .filter(|card| !filter || config.cards().iter().any(|name| **name == **card))
+        .filter_map(|card| hw_mon::open_hw_mon(card).ok())
+        .filter(|hw_mon| !filter || { hw_mon.is_amd() })
+        .filter(|hw_mon| !filter || hw_mon.name_is_amd())
+        .collect())
+}

src/voltage/mod.rs

@@ -0,0 +1,9 @@
+#[derive(Debug, gumdrop::Options)]
+pub enum VoltageCommand {
+    Placeholder(Placeholder),
+}
+
+#[derive(Debug, gumdrop::Options)]
+pub struct Placeholder {
+    help: bool,
+}